ZyXEL Communications Vantage Report User Manual page 642

Appendix B ZyWALL USG Series and ZyWALL 1050 Log Descriptions
Table 291 Force Authentication Logs
LOG MESSAGE
Force User
Authentication will be
enabled due to http
server is enabled.
Force User
Authentication will be
disabled due to http
server is disabled.
Force User
Authentication may not
work properly!
Table 292 File Manager Logs
LOG MESSAGE
ERROR:#%s, %s
WARNING:#%s, %s
ERROR:#%s, %s
WARNING:#%s, %s
Resetting system...
System resetted. Now
apply %s..
Running %s...
642
DESCRIPTION
Force user authentication will be turned on because HTTP
server was turned on.
Force user authentication will be turned off because HTTP
server was turned off.
DESCRIPTION
Apply configuration failed, this log will be what CLI command
is and what error message is.
1st %s is CLI command.
2nd %s is error message when apply CLI command.
Apply configuration failed, this log will be what CLI command
is and what warning message is.
1st %s is CLI command.
2nd %s is warning message when apply CLI command.
Run script failed, this log will be what wrong CLI command is
and what error message is.
1st %s is CLI command.
2nd %s is error message when apply CLI command.
Run script failed, this log will be what wrong CLI command is
and what warning message is.
1st %s is CLI command.
2nd %s is warning message when apply CLI command.
Before apply configuration file.
After the system reset, it started to apply the configuration
file.
%s is configuration file name.
An administrator ran the listed shell script.
%s is script file name.
Vantage Report User's Guide