ZyXEL Communications Vantage Report User Manual page 625

User guide
Hide thumbs Also See for Vantage Report:
Table of Contents

Advertisement

Table 282 System Logs (continued)
LOG MESSAGE
DHCP request received
via interface
%s (%s:%s), src_mac:
%s with requested IP:
%s
IP confliction is
detected. Send back
DHCP-NAK.
Clear ARP cache done
NTP update successful,
current time is %s
NTP update failed
Device is rebooted by
administrator!
Insufficient memory.
Connect to dyndns
server has failed.
Update the profile %s
has failed because of
strange server
response.
Update the profile %s
has succeeded because
the IP address of FQDN
%s was not changed.
Update the profile %s
has succeeded.
Update the profile %s
has failed because the
FQDN %s is invalid.
Update the profile %s
has failed because the
FQDN %s is malformed.
Update the profile %s
has failed because the
FQDN %s is not under
your control.
Update the profile %s
has failed because the
FQDN %s was blocked
for abuse.
Update the profile %s
has failed because of
authentication fail.
Vantage Report User's Guide
Appendix B ZyWALL USG Series and ZyWALL 1050 Log Descriptions
DESCRIPTION
The device received a DHCP request through the specified
interface.
IP conflict was detected. Send back DHCP-NAK.
Clear ARP cache done.
The device successfully synchronized with a NTP time server.
%s is the time format.
The device was not able to synchronize with the NTP time
server successfully.
An administrator restarted the device.
Cannot allocate system memory.
Cannot connect to members.dyndns.org to update DDNS.
Update profile failed because the response was strange, %s is
the profile name.
Update profile succeeded, because the IP address of profile is
unchanged, %s is the profile name.
Update profile succeeded, %s is the profile name.
Update profile failed because FQDN for the profile is invalid for
DynDNS, 1st %s is the profile name, 2nd %s is the FQDN of
the profile.
The FQDN format is malformed for DynDNS server, 1st %s is
the profile name, 2nd %s is the FQDN of the profile.
The owner of this FQDN is not the user, 1st %s is the profile
name, 2nd %s is the FQDN of the profile.
The FQDN is blocked by DynDNS, 1st %s is the profile name,
2nd %s is the FQDN of the profile.
Try to update profile, but failed, because of authentication fail,
%s is the profile name.
625

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vantage report 3.0Vantage report 2.3

Table of Contents