ZyXEL Communications Vantage Report User Manual page 650

Appendix C ZyNOS Log Descriptions
Table 300 CDR Logs
LOG MESSAGE
board %d line %d channel %d,
call %d, %s C01 Outgoing Call
dev=%x ch=%x %s
board %d line %d channel %d,
call %d, %s C02 OutCall
Connected %d %s
board %d line %d channel %d,
call %d, %s C02 Call
Terminated
Table 301 PPP Logs
LOG MESSAGE
ppp:LCP Starting
ppp:LCP Opening
ppp:CHAP Opening
ppp:IPCP Starting The PPP connection's Internet Protocol Control Protocol stage is
ppp:IPCP Opening
ppp:LCP Closing
ppp:IPCP Closing
Table 302 UPnP Logs
LOG MESSAGE
UPnP pass through Firewall
650
DESCRIPTION
The router received the setup requirements for a call.
"call" is the reference (count) number of the call.
"dev" is the device type (3 is for dial-up, 6 is for
PPPoE, 10 is for PPTP). "channel" or "ch" is the call
channel ID. For example,"board 0 line 0 channel 0,
call 3, C01 Outgoing Call dev=6 ch=0 "Means the
router has dialed to the PPPoE server 3 times.
The PPPoE, PPTP or dial-up call is connected.
The PPPoE, PPTP or dial-up call was disconnected.
DESCRIPTION
The PPP connection's Link Control Protocol stage has started.
The PPP connection's Link Control Protocol stage is opening.
The PPP connection's Challenge Handshake Authentication Protocol
stage is opening.
starting.
The PPP connection's Internet Protocol Control Protocol stage is
opening.
The PPP connection's Link Control Protocol stage is closing.
The PPP connection's Internet Protocol Control Protocol stage is
closing.
DESCRIPTION
UPnP packets can pass through the firewall.
Vantage Report User's Guide