To Remove Keypad - Agilent Technologies U1602B User's And Service Manual

8 General Disassemble

To remove keypad

1 Perform the following procedures:
•
•
•
•
2 Loosen the screws as pointed in Figure 8- 11 below to remove the
Figure 8-11 Remove the ten screws from the front cover
3 Disengage the keypad interface board and pull the rubber keypad from
Figure 8-12 Remove keypad from the front cover
Agilent U1602B/U1604B User's and Service Guide
To remove stand
To remove battery pack
To remove handler
To remove front and rear casing
keypad interface board.
the front cover.
167