To Erase Waveform - Agilent Technologies U1602B User's And Service Manual

3 Using the Scope Functions
3 Press F2 to load the waveform. The horizontal and vertical scale factors
Figure 3-49 Load a waveform from a USB flash memory device

To Erase Waveform

To erase saved waveforms from the USB flash memory drive, follow the
instructions below:
1 Press and hold
2 The display lists the flash memory's contents. Turn the rotary switch to
3 Press F3 to erase the file from the list. This step removes the waveform
90
will appear at the bottom of the waveform display area.
move the cursor to select the file.
permanently.
to access Save/Recall menu.
Agilent U1602B/U1604B User's and Service Guide
Recalled waveform
Recalled waveform settings