Autoscale And Run/Stop Controls; Autoscale; Autoscale Conditions - Agilent Technologies U1602B User's And Service Manual

3 Using the Scope Functions

Autoscale and Run/Stop Controls

Autoscale

Autoscale automatically configures the oscilloscope to the best display of
input signals for both channels. Autoscale analyzes and adjusts the vertical
sensitivity, horizontal sensitivity and trigger configurations at the best
condition. The instrument sets the time/div by counting the trigger pulse
and selects the most appropriate time/div for both the input signals.
Both channels are turned on and will be examined for signal activities
concurrently. By pressing the
instrument sets the following default values to the autoscale mode:
Table 3-1 Autoscale conditions
Functions
CH 1 Coupling
CH1 Invert
CH 1 Position
CH 2 Coupling
CH 2 Invert
CH 2 Position
Time Position
Trigger Type
Trigger Edge
Trigger Edge Coupling
Trigger Edge Slope
92
button at the front panel, the

Autoscale conditions

AC
Off
0 div
AC
Off
0 div
Center
Edge
CH 1
DC
Rising
Agilent U1602B/U1604B User's and Service Guide