Agilent Technologies U1602B User's And Service Manual page 55

• Utility mode allows you to configure the instrument's real time display,
7 Measure Main function key to select a list of predefined
8 Cursor Main function key to perform waveform measurement using X
9 Trigger Main function key to determine the type of trigger control to
10 Run/Stop Main function key to force instrument to start scanning for
11 Save/Recall Main function key that allows you to save, recall and erase
12 Autoscale By pressing the Autoscale key, both the channels will be
13 Range By pressing the Autoscale key in any auto- range meter mode,
Agilent U1602B/U1604B User's and Service Guide
auto power off, language selection for Quick Help, USB connectivity,
self- calibration and self- test operation.
auto- measurement to be displayed on the screen.
or Y cursor functions. To access this function, press and hold the
button.
capture different types of waveform signals.
trigger. If the trigger mode is set to Normal, the display will not update
until a trigger is found. If the trigger mode is set to Auto, the
instrument looks for a trigger. If no trigger is found, it will
automatically trigger and display the signals immediately.
the previously stored configuration setup and waveform. Connect a USB
flash memory to store or recall instrument's configuration setup files
and waveforms. Simply unplug the USB flash memory without any
precaution before removing it.
activated and the input signal is scaled to the best display.
the instrument allows you to select the range of your preference.
Front Panel and Displays Overview 2
21