To Remove Front And Rear Casing - Agilent Technologies U1602B User's And Service Manual

8 General Disassemble

To remove front and rear casing

1 Perform the following procedures:
•
•
•
2 After performing the above two procedures, gently dismantle the front
3 Remove the terminal connector and washer from the multimeter input
Figure 8-9 Remove and keep the above wear-and-tear parts for re-assemble process
Agilent U1602B/U1604B User's and Service Guide
To remove stand
To remove battery pack
To remove handler
and rear casing from the instrument.
terminal. Remove the AC power connector from the instrument and
keep safe for the instrument re- assemble.
Multimeter input terminal connector
AC Power Connector
165