1. Manuals
  2. Brands
  3. Agilent Technologies Manuals
  4. Test Equipment
  5. U1401A
  6. Quick start manual

Agilent Technologies U1401A Quick Start Manual

Multi-function calibrator/meter handheld
Hide thumbs Also See for U1401A:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual and Service Information
The following items are included with your instrument:
✔
Carrying case and protective holster
✔
Rechargeable battery pack (1.2 V NiMH AA × 8)
✔
Power cord and AC power adapter
✔
Silicone test leads, alligator clips, and a yellow test lead for mA
simulation
✔
Certificate of calibration
✔
Printed Quick Start Guide
If anything is missing or damaged, please contact the nearest Agilent
Sales Office.
Your multimeter is capable of remote data logging. To use this feature, you will need an IR-USB
N O T E
cable (U5481A, purchased separately) and the Agilent GUI Data Logger Software (downloadable
from www.agilent.com/find/hhTechLib).
Ensure that the terminal connections are correct for that particular measurement
WA R N I N G
selection before starting any measurement. To avoid damage to the device, do not
exceed the rated input limit.
Degradation of some product specifications can occur in the presence of ambient
C A U T I O N
electromagnetic (EM) fields and noise that are coupled to the powerline or I/O cables
of the instrument. The instrument will self-recover and operate to all specifications
when the source of ambient EM field and noise are removed or when the instrument
is protected from the ambient EM field or when the instrument cabling is shielded
from the ambient EM noise.
Agilent U1401A Handheld
Multi-Function Calibrator/Meter

Quick Start Guide

Agilent Technologies
U1401A Quick Start Guide

Advertisement

Table of Contents
loading

Related Manuals for Agilent Technologies U1401A

Summary of Contents for Agilent Technologies U1401A

  • Page 1: Quick Start Guide

    EM field and noise are removed or when the instrument is protected from the ambient EM field or when the instrument cabling is shielded from the ambient EM noise. U1401A Quick Start Guide Agilent Technologies...

  • Page 2: Performing Voltage Measurements

    With the rotary switch at mA, another option selectable with the key is the percentage scale of DC mA measurement. Frequency measurement During AC/DC voltage or AC/DC current measurement, you can measure the signal frequency by pressing at any time. U1401A Quick Start Guide...

  • Page 3: Performing Resistance Measurement And Continuity Test

    5 Touch the surface to be • Clean the surface to be measured with the measured and make sure that thermocouple probe and read the probe is securely touching the display. the surface. U1401A Quick Start Guide...

  • Page 4: Constant Voltage And Current Outputs

    The U1401A can generate and measure signals simultaneously. While the mode is N O T E enabled, pressing disables the U1401A output by placing it in the standby mode ( ). Pressing OUTPUT again toggles the output on ( Constant Voltage and Current Outputs...

  • Page 5: Other Functions And Features

    The output terminals are protected with DC 30 V overload protection. The overload protection limits of the input terminals are shown in the table below. Functions Overload protection AC/DC voltage measurement 250 Vrms Resistance measurement and continuity test Temperature measurement AC/DC current measurement 250 V/630 mA, fast-acting fuse U1401A Quick Start Guide...

  • Page 6: Charging The Battery

    Charging the battery A new rechargeable battery comes in a discharged condition and must be charged before use (refer to the U1401A User's and Service Guide for charging instructions). Upon initial use (or after a prolonged storage period) the rechargeable battery may require three to four charge/discharge cycles before achieving maximum capacity.

  • Page 7: Tilt Stand

    Do not proceed beyond a CAUTION notice until the indicated conditions are fully Caution, risk of electric shock understood and met. For further safety information details, refer to the U1401A Handheld Multi- Function Calibrator/Meter User’s and Service Guide.
  • Page 8 Printed in Malaysia Second Edition, May 4, 2012 © Agilent Technologies, Inc., 2008–2012 U1401-90011 Agilent Technologies...

Table of Contents