Pressure Meter - Agilent Technologies U1602B User's And Service Manual

4 Using the Digital Multimeter Functions
8 Press F3 to perform automatic measurement for minimum, maximum
9 Press F4 to refresh and recollect measurement reading.
Figure 4-10 Humidity measurement

Pressure Meter

A pressure adapter is required to perform the pressure measurement. The
instrument auto- selects the most proper measurement range and displays
in proper decimal point, value and symbols.
To perform pressure measurement, follow the instructions below:
1 Press
2 Press F3 to access auxiliary submenu.
3 In the auxiliary submenu, press F4 to select the pressure meter.
4 In the pressure meter submenu, press F1 to select measurement unit to
5 Ensure the pressure adapter positive terminal (+) is connected to
6 Touch the material under test with the probe tip.
7 Read the pressure reading from the display. The display indicates the
110
and average readings.
button to access meter menu.
either psi or kPa.
instrument input terminal
input jacks of the instrument.
proper decimal point, value and symbols.
and negative terminal (–) to COM
Agilent U1602B/U1604B User's and Service Guide