Capacitance Measurement - Agilent Technologies U1602B User's And Service Manual

Capacitance Measurement

Disconnect circuit power and discharge all high-voltage capacitors before
WA R N I N G
performing capacitance measurement to avoid electric shock and damage to the
instrument.
The capacitance measurement is available only for auto- range mode. To
perform the capacitance measurement, do the following instructions:
1 Press
2 Press F2 to access ohmmeter submenu.
3 In the ohmmeter submenu, press F1 to select the capacitance
4 Connect the red test lead to the
5 Probe the red test point to the positive terminal (anode) of the
6 Read the capacitance reading from the display.
7 To perform relative function, please refer to
Figure 4-7 Capacitance measurement
Agilent U1602B/U1604B User's and Service Guide
button to access meter menu.
measurement (displayed as "Cap") from the pull- up menu.
test lead to the COM terminal.
capacitor and the black test lead on the negative terminal (cathode).
section in this chapter.
Using the Digital Multimeter Functions
input terminal and the black
"Relative Function
4
112"
105