Table of Contents
Advertisement
Figure 4-9 Current measurement
Humidity Meter
To perform humidity measurement, a humidity adapter is required. The
humidity range is auto- selected by the instrument and displayed in proper
decimal point, value and symbols.
To perform humidity measurement, follow the instructions below:
1 Press
2 Press F3 to access auxiliary submenu.
3 In the auxiliary submenu, press F3 to select the humidity meter.
4 Ensure the humidity adapter positive terminal (+) is connected to
5 Touch the material under test with the probe tip.
6 Read the humidity reading in %RH from the display. The display
7 To perform relative function, please refer to
Agilent U1602B/U1604B User's and Service Guide
button to access meter menu.
instrument input terminal
input jacks of the instrument.
indicates the proper decimal point, value and symbols.
section in this chapter.
Using the Digital Multimeter Functions
and negative terminal (–) to COM
"Relative Function
4
112"
109
Advertisement
Chapters
Table of Contents
