Agilent Technologies U1602B User's And Service Manual page 215

Vertical sensitivity
Maximum input
Offset/Dynamic range
Input impedance
Coupling
Probes
Probe attenuation factors
Probe compensation output
Maximum probe input
Noise peak-to-peak
DC vertical offset accuracy
Single cursor accuracy
Dual cursor accuracy
Horizontal System
Range
Resolution
Reference position
Delay range (pre-trigger)
Delay range (post-trigger)
Analog Dt accuracy
Modes
RMS Jitter
176
5 mV/div to 100 V/div (1:1 passive probe)
50 mV/div to 1 kV/div (10:1 passive probe)
500mV/div to 10 kV/div (100:1 passive probe)
CAT III 300 Vrms (up to 400 Hz) from terminal to ground
± 5 div
1 MW || < 20 pF
AC, DC, GND
U1560-60001 1:1 passive probe
U1561-60001 10:1 passive probe
U1562-60001 100:1 passive probe
1x, 10x, 100x
3 Vp-p, ~ 1 kHz
1x CAT III 300 VAC
10x, 100x CAT III 600 VAC
3% of full scale or 5 mV, whichever is greater
±0.1 div ±2 mV ±0.5% offset value
4% full scale
4% full scale
U1602B: 50 ns to 50 s/div
U1604B: 10 ns to 50 s/div
U1602B: 2 ns
U1604B: 400 ps
Left, center, right
15 divisions
1000 divisions
± 3% reading ± 0.4% screen
Main, XY, Roll
5% of horizontal scale or 5 ns whichever is higher
Characteristics and Specifications
Agilent U1602B/U1604B User's and Service Guide
9