Table of Contents
Advertisement
2
Hardware Installation
Step 3: Insert and remove blades
The blades are not hot swappable: You must power down the chassis to
insert or remove blades.
22
Empty Slots—Do not operate the chassis with empty slots.
•
C AUTIO N
Always insert a filler blade (N5650-00080) or application
blade into empty slots. This is especially important for the
slots on either side of an application blade. This allows proper
air flow and cooling, and provides EMI shielding for the
chassis and installed components. Leaving slots empty can
increase fan speed, raise ambient noise, overheat
components, and shut down blades.
Chassis Manager—Do not remove the chassis manager,
•
which is integral to the operation of the chassis. Chassis
managers that need servicing are to be removed by Agilent
personnel only.
Agilent Digital Test Console Installation Guide
Advertisement
Table of Contents
