xxviii
Figure
4-4. Continuity test shorted with audible beeper
sound.
102
Figure
4-5. Diode in forward bias condition
Figure
4-6. Diode in open condition
Figure
4-7. Capacitance measurement
Figure
4-8. Temperature measurement in degrees Celsius (°C)
together with degree Fahrenheit (°F) display.
Figure
4-9. Current measurement
Figure
4-10. Humidity measurement
Figure
4-11. Pressure measurement
Figure
4-12. Set the reading as reference value
Figure
4-13. Set the reading as measured value
Figure
4-14. Relative value obtained from the delta of the measured
and reference value.
Figure
4-15. Automatic measurement in resistance measurement
mode
114
Figure
4-16. Auto-range mode
Figure
4-17. Manual range mode
Figure
5-1. Maximum measurement is selected for DC voltage data
recording. The initial time base is 15 seconds — 150
seconds.
Figure
5-2. After exceeding 150 seconds, the graph automatically
compresses to half screen and the time base changes to
30 seconds — 300 seconds.
Figure
5-3. Enabling the CSV saving function
Figure
5-4. Setting the interval
Figure
7-1. Test connection from calibrator to instrument and digital
multimeter
Figure
7-2. Test connections from calibrator to instrument
Figure
7-3. Self-calibration dialog box
Figure
8-1. Push towards the arrow direction to remove the
stand
159
Figure
8-2. Disassemble the stand from the instrument
Figure
8-3. Remove battery cover screw
Agilent U1602B/U1604B User's and Service Guide
104
105
109
110
111
113
116
116
120
120
122
137
151
160
104
107
112
113
121
144
159