To Remove Lcd Display - Agilent Technologies U1602B User's And Service Manual

8 General Disassemble

To remove LCD display

1 Perform the following procedures:
•
•
•
•
•
2 Unscrew the four screw as located in the Figure 8- 14.
Figure 8-14 Remove four screw to dismantle the LCD display unit
To re-assemble the instrument, follow the reverse instructions of this chapter.
N O T E
Agilent U1602B/U1604B User's and Service Guide
To remove stand
To remove battery pack
To remove handler
To remove front and rear casing
To dismantle system boards
169