Agilent Technologies U1602B User's And Service Manual page 29

Agilent U1602B/U1604B User's and Service Guide
Figure 8-4. Unplug 3-wire connector from PCBA board using
tweezer
Figure 8-5. Remove battery pack cover without removing
stand 162
Figure 8-6. Unplug 2-wire connector with a tweezer.
Figure 8-7. Remove screw from the rear cover
Figure 8-8. Remove handler from the instrument
Figure 8-9. Remove and keep the above wear-and-tear parts for
re-assemble process
Figure 8-10. Remove front casing (right) and rear casing (left) from
PCBA of the instrument
Figure 8-11. Remove the ten screws from the front cover
Figure 8-12. Remove keypad from the front cover
Figure 8-13. Remove the six screws and pull the ribbon cable from
the PCBA board
Figure 8-14. Remove four screw to dismantle the LCD display
unit 169
161
165
166
168
162
164
164
167
167
xxix