To Save And Recall Waveform - Agilent Technologies U1602B User's And Service Manual

3 Using the Scope Functions
Figure 3-41 The <Load> display indicates that a configuration setup file has been saved

To Save and Recall Waveform

To save or recall waveforms from internal memory, follow the instructions
below:
1 Press and hold
2 Press F2 to access Save/Load Waveform menu.
3 Up to 10 waveforms can be stored over four pages of menu. Press the
4 In Figure 3- 41, press F1 to save the configuration setup into Setup 1.
5 Press F1 again to load the Waveform 1 from the internal memory. Refer
6 Go through the same save and recall waveform steps for saving and
82
into Setup 1 and you can press F1 to retrieve the setup from internal memory.
respective softkey to save or load waveform to/from internal memory.
to Figure 3- 42.
recalling the subsequent waveforms.
to access Save/Recall menu.
Agilent U1602B/U1604B User's and Service Guide