Agilent Technologies U1602B User's And Service Manual page 63

2 Press F1 softkey to access channel 1 (CH 1) submenu or F2 to access
3 The submenu for both channels are similar. Figure 3- 2 shows the
Vertical ground
reference symbol
Figure 3-2 Select On or Off to enable or disable the waveform display
4 Select "On" in the pull- up menu by pressing F1 to display waveform
5 In the "On" state, the vertical sensitivity in Volt/div (displayed in V/)
6 You can perform the same procedure for channel 2 or for both
Agilent U1602B/U1604B User's and Service Guide
channel 2 (CH 2) submenu.
generic submenu for channel 1. To enable waveform display for channel
1, press F1 to display the pull- up menu.
input.
and indication of the vertical ground reference position will be
displayed according to the position setting of the channel (refer to the
next section for detailed explanation).
channels.
Using the Scope Functions 3
27