To Save Waveform; To Load Waveform - Agilent Technologies U1602B User's And Service Manual

To Save Waveform

The instrument allows you to save a waveform in *.bmp image format or
*.svw file format. The instrument saves the configuration settings and
waveform simultaneously in *.svw file format. To save waveforms to a USB
flash memory device, follow the instructions below:
1 Connect a USB flash memory device, press and hold
2 The display will list the flash memory's contents. A message box with
3 Press F1 to save the waveform. You will be prompted to input filename
4 Turn the rotary switch to move the cursor to the desired character
5 After completion of entering the filename, press F1 to save the
The filename can be configured for English capital letters and numeric numbers. The
N O T E
backspace is used to delete the previous character when entering the filename.
Clear is used to clear all entered characters when entering the filename.

To Load Waveform

When downloading a waveform from USB flash memory, you are prompted
to select the file to download from the list of USB flash memory contents.
Do the following to load a waveform from the external memory device:
1 Connect a USB flash memory device. Press and hold
2 The display lists the flash memory's contents. Turn the rotary switch to
Agilent U1602B/U1604B User's and Service Guide
Save/Recall menu.
option to save waveform in BMP or SVW format will appear. Turn the
rotary switch to select the format.
for the waveform.
from the list of characters located at the bottom of the screen.
waveform into USB flash memory device. The filename with *.svw or
*.bmp extension will appear in the file list.
Save/Recall menu.
move the cursor to select the file.
Using the Scope Functions
to access
to access
3
89