Ampere Meter - Agilent Technologies U1602B User's And Service Manual

4 Using the Digital Multimeter Functions

Ampere Meter

The current or ampere measurement requires a current adapter to work
with the instrument. The current range is auto- selected by the instrument
and displayed in proper decimal point, value and symbols.
To perform current measurement, follow the instructions below:
1 Press
2 Press F3 to access auxiliary submenu.
3 In the auxiliary submenu, press F2 to select the ampere meter.
4 In the ampere meter submenu, press F1 to select AC current or DC
5 Adjust the scale setting of your current adapter (1 mV/A or 10 mV/A).
6 Press F4 to proceed to page 2/2 of the ampere meter submenu.
7 Press F1 in page 2/2 to select the measurement range (refer to Figure
8 Ensure the current adapter positive terminal (+) is connected to
9 Probe the test point of the device under test.
10 Read the current reading from the display. The display indicates the
11 To perform relative function, please refer to
12 Press F3 to perform automatic measurement for minimum, maximum
13 Press F2 in page 2/2 of the ampere meter submenu to refresh and
108
button to access meter menu.
current measurement (refer to Figure 4- 9).
4- 9). The measurement range is selected based on the setting on the
current adapter (1 mV/A or 10 mV/A).
instrument input terminal
input jacks of the instrument.
proper decimal point, value and symbols.
section in this chapter.
and average readings.
recollect measurement reading.
and negative terminal (–) to COM
"Relative Function
Agilent U1602B/U1604B User's and Service Guide
112"