Characteristics - Agilent Technologies U1602B User's And Service Manual

9 Characteristics and Specifications

Characteristics

All characteristics are typical performance values and are not warranted.
Characteristics are valid after a 30- minute warm- up period and within
±10
Table 9-2 Characteristics
SCOPE CHARACTERISTICS
Description
Maximum sample rate
Equivalent sample rate
Maximum Recording length
Vertical System: Scope Channels
Analog channels
Bandwidth (–3 dB)
AC coupled
Rise time
Single shot bandwidth
Agilent U1602B/U1604B User's and Service Guide
o
C from firmware calibration temperature.
Sampling rate Time base
100 MSa/s
each channel
200 MSa/s
single
channel and
interleaved
2.5 GSa/s
125,000 points viewable on screen with zoom function.
Number of points displayed will vary according to time base selected.
Channel 1 and Channel 2 simultaneous acquisition
U1602B: DC to 20 MHz
U1604B: DC to 40 MHz
< 10 Hz without probe
< 1 Hz with 10 MW 10:1 passive probe
U1602B: < 17.5 ns
U1604B: < 8.8 ns
U1602B: 20 MHz
U1604B: 40 MHz
Remarks
50 s/div to Maximum sampling rates are shown here.
250 ns/div Sampling rate will vary according to time base
selected. Refer to
125 ns/div 200 MS/s only available at 125 ns/div timebase.
125 ns/div Functions only for U1604B.
to 10 ns/div
Table 9-3.
175