To Erase Waveform - Agilent Technologies U1602B User's And Service Manual

To Erase Waveform

To erase the previous saved waveform from internal memory, follow the
instructions below:
1 Press and hold
2 Press F4 (Erase Waveform) to access the Erase Waveform menu.
3 On page 4/4, press F3 (Erase Waveform) to clear and erase the recalled
4 In
Figure 3-45 The <None> display indicates that no waveform is being saved. The <Erase>
Agilent U1602B/U1604B User's and Service Guide
waveform.
Table 3- 45, press F1 to erase the waveform from Waveform 1.
in Waveform 1 shows that you can erase the waveform from the internal mem-
ory.
to access the Save/Recall menu.
Using the Scope Functions 3
85