3
Using the Scope Functions
6 To turn off the measurement file, turn the rotary switch for the
Figure 3-24 Select automatic measurement for the Measure 1 file.
Time Automatic Measurements
+ Duty
The positive duty cycle of a repetitive pulse train is the ratio of the
positive pulse width to the period, expressed in percentage.
+Duty cycle =
–Duty
The negative duty cycle of a repetitive pulse train is the ratio of the
negative pulse width to the period, expressed in percentage.
60
respective file until you see "Off" in the list. Press the rotary switch to
set the off condition.
+Width x 100
Period
Agilent U1602B/U1604B User's and Service Guide