Modifying Global Cflowd Components - Alcatel-Lucent 7750 SR OS Configuration Manual

Modifying Global Cflowd Components

Cflowd parameter modifications apply to all instances where cflowd or traffic sampling is enabled.
Changes are applied immediately.
Use the following cflowd commands to modify global cflowd parameters:
CLI Syntax: config>cflowd#
The following example displays the cflowd command usage to modify configuration parameters:
Example: config>cflowd# active-timeout 60
The following example displays the common cflowd component configuration:
ALA-1>config>cflowd# info
#------------------------------------------
#------------------------------------------
ALA-1>config>cflowd#
7750 SR OS Router Configuration Guide
active-timeout minutes
[no] active-timeout
cache-size num-entries
[no] cache-size
inactive-timeout seconds
[no] inactive-timeout
overflow percent
[no] overflow
rate sample-rate
[no] rate
[no] shutdown
config>cflowd# no inactive-timeout
config>cflowd# overflow 2
config>cflowd# rate 10
active-timeout 60
overflow 2
rate 10
Cflowd
Page 459