Alcatel-Lucent 7750 SR OS Configuration Manual page 409

Sample Output
A:ALA-48# show filter ipv6 100
===============================================================================
7750 SR OS Router Configuration Guide
Label
Match action
Ing. Matches
Src. Port
Dest. Port
Dscp
ICMP Code
Option-present
Int. Sampling
Multiple Option
TCP-ack
Egr. Matches
Description (Continued)
The filter does not have an explicit forward or drop
Default —
match action specified. If the filter entry ID indicates the entry is
, then the filter entry is incomplete as no action has been
(Inactive)
specified.
Drop packets matching the filter entry.
Drop —
The explicit action to perform is forwarding of the
Forward —
packet. If the action is Forward, then if configured the nexthop infor-
mation should be displayed, including Nexthop: <IP address>, Indi-
rect: <IP address> or Interface: <IP interface name>.
Forward - indirect: ip-addr
Forward - interface: ip-int-name
Forward - next-hop: ip-addr
The number of ingress filter matches/hits for the filter entry.
The source TCP or UDP port number or port range.
The destination TCP or UDP port number or port range.
The DiffServ Code Point (DSCP) name.
The ICMP code field in the ICMP header of an IP packet.
Specifies not to search for packets that contain the option field
Off —
or have an option field of zero.
Matches packets that contain the option field or have an option
On —
field of zero be used as IP filter match criteria.
Interface traffic sampling is disabled.
Off —
Interface traffic sampling is enabled.
On —
The option fields are not checked.
Off —
Packets containing one or more option fields in the IP header
On —
will be used as IP filter match criteria.
No matching of the ACK bit.
Off —
Matches the ACK bit being set or reset in the control bits of the
On —
TCP header of an IP packet.
The number of egress filter matches/hits for the filter entry.
Filter Policies
Page 409