Basic Cflowd Configuration
This section provides information to configure cflowd and configuration examples of common
configuration tasks. In order to sample traffic, the minimal cflowd parameters that need to be
configured are:
•
•
•
The following example displays a cflowd configuration.
ALA-1>config>cflowd# info detail
----------------------------------------------
----------------------------------------------
ALA-1>config>cflowd#
Page 446
Cflowd must be enabled.
At least one collector must be configured and enabled.
Sampling must be enabled on either:
→ An IP filter entry and applied to a service or an port.
→ An interface applied to a port.
active-timeout 30
cache-size 65536
inactive-timeout 15
overflow 1
rate 1000
collector 10.10.10.103:5
no aggregation
autonomous-system-type origin
no description
no shutdown
exit
no shutdown
7750 SR OS Router Configuration Guide