Alcatel-Lucent 7750 SR OS Configuration Manual page 303

Hide thumbs Also See for 7750 SR OS:
Table of Contents

Advertisement

Table 18: CLI Commands to Configure Filter Policies Parameters (Continued)
Command
filter-sample
interface-disable-
sample
Configure IP filter entry matching criteria
config>filter>ip-filter>entry
match
dscp
dst-ip
dst-port
fragment
icmp-code
icmp-type
ip-option
multiple-option
option-present
src-ip
src-port
tcp-syn
tcp-ack
7750 SR OS Router Configuration Guide
Specifies that traffic matching the associated IP filter entry is sampled if
the IP interface is set to cflowd ip-filter mode.
Specifies that traffic matching the associated IP filter entry is not sampled
if the IP interface is set to cflowd ip-filter mode.
Enables the context to configure match criteria for the filter entry.
Configures a DiffServ Code Point (DSCP) name to be used for IP filter
matching.
Configures a destination IP address range to be used for IP filter matching.
Configures a destination TCP or UDP port number or port range for IP
filter matching.
Configures fragmented or non-fragmented IP packets as an IP filter
matching.
Configures matching on ICMP code field in the ICMP header of an IP
packet for IP filter matching.
Configures matching on ICMP type field in the ICMP header of an IP
packet for IP filter matching.
Configures matching packets with a specific IP option or a range of IP
options in the first option of the IP header as for IP filter matching.
Configures matching packets that contain one or more than one option
fields in the IP header for IP filter matching.
Configures matching packets that contain the option field or have an
option field of zero in the IP header for IP filter matching.
Configures a source IP address range to be used for IP filter matching.
Configures a source TCP or UDP port number or port range for IP filter
matching.
Configures matching on the SYN bit being set or reset in the control bits
of the TCP header of an IP packet for IP filter matching.
Configures matching on the ACK bit being set or reset in the control bits
of the TCP header of an IP packet for IP filter matching.
Description
Filter Policies
Page
368
369
369
375
375
376
377
377
377
378
379
379
379
380
381
381
Page 303

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7750 sr series

Table of Contents