Alcatel-Lucent 7750 SR OS Configuration Manual page 371

match
Syntax match [next-header next-header]
no match
Context config>filter>ipv6-filter>entry
Description
This command enables the context to enter match criteria for the filter entry. When the match criteria
have been satisfied the action associated with the match criteria is executed.
If more than one match criteria (within one match statement) are configured then all criteria must be
satisfied (AND function) before the action associated with the match is executed.
A match context may consist of multiple match criteria, but multiple match statements cannot be
entered per entry.
The no form of the command removes the match criteria for the entry-id.
Parameters
next-header — Specifies the IPv6 next header to match. Note that this parameter is analogous to the
7750 SR OS Router Configuration Guide
Protocol Protocol ID
crudp 127
protocol parameter used in IP-Filter match criteria.
Values
[0 — 42 | 45 — 49 | 52 — 59 | 61— 255] — protocol numbers accepted in decimal,
hexidecimal, or binary - DHB
keywords: none, crtp, crudp, egp, eigrp, encap, ether-ip, gre, icmp, idrp, igmp, igp,
ip, ipv6, ipv6-icmp, ipv6-no-nxt, isis, iso-ip, l2tp, ospf-igp, pim, pnni, ptp, rdp,
rsvp, stp, tcp, udp, vrrp
* — udp/tcp wildcard
Description
Combat Radio User Datagram
Filter Policies
Page 371