Alcatel-Lucent 7750 SR OS Configuration Manual page 373

port-id — Specifies the physical port ID in the slot/mda/port format.
bundle-id — Specifies the multilink bundle to be associated with this IP interface. The bundle key-
ima — Specifies Inverse Multiplexing over ATM. An IMA group is a collection of physical links
qtag1, qtag2 — Specifies the encapsulation value used to identify the SAP on the port or sub-port. If
sdp-id — The SDP identifier.
vc-id — The virtual circuit identifier. This value is used to validate the VC ID portion of each mesh
7750 SR OS Router Configuration Guide
If the card in the slot has Media Dependent Adapters (MDAs) installed, the port-id must be in the
slot_number/MDA_number/port_number format. For example 1/1/3 specifies the port 3 on
MDA 1 in slot 1.
The port-id must reference a valid port type. When the port-id parameter represents SONET/
SDH and TDM channels, the port ID must include the channel ID. A period "." separates the
physical port from the channel-id. The port must be configured as an access port.
If the SONET/SDH port is configured as clear-channel then only the port is specified.
word must be entered at the beginning of the parameter.
The command syntax must be configured as follows:
bundle-id: bundle-type-slot-id/mda-slot.bundle-num
bundle-id value range: 1 — 128
For example:
ALA-12>config#
ALA-12>config>port# multilink-bundle
bundled together and assigned to an ATM port.
this parameter is not specificially defined, the default value is 0.
Values
qtag1:
qtag2 :
Values
1 — 17407
SDP binding defined in the service. The default value of this object is equal to the service ID.
Values 1 — 4294967295
id
path-id
cc-type
cc-id
lag-id lag-id
lag
id
qtag1 0 — 4094
qtag2 *, 0 — 4094
vpi NNI
UNI
vci 1, 2, 5 — 65535
dlci 16 — 1022
port bundle-ima-5/1.1
0 — 4094
* | 0 — 4094
Filter Policies
1 — 8
a, b
.sap-net, .net-sap]
0 — 4094
keyword
1 — 200
0 — 4095
0 — 255
Page 373