Enabling Cflowd - Alcatel-Lucent 7750 SR OS Configuration Manual

Enabling Cflowd

Cflowd is disabled by default. You must enter the
enable traffic sampling.
Use the following CLI syntax to enable cflowd:
CLI Syntax: config# cflowd
The following example displays the default values when cflowd is initially enabled. No collectors
or collector options are configured.
ALA-1>config# info detail
...
#------------------------------------------
echo "Cflowd Configuration"
#------------------------------------------
cflowd
exit
#------------------------------------------
ALA-1>config#
7750 SR OS Router Configuration Guide
no shutdown
active-timeout 30
cache-size 65536
inactive-timeout 15
overflow 1
rate 1000
no shutdown
command to administratively
no shutdown
Cflowd
Page 449