Table 10: Show Vrrp Instance Output - Alcatel-Lucent 7750 SR OS Configuration Manual

Show Commands
vrid vrid — Displays detailed information for the specified VRRP instance on the IP interface.
Output VRRP Instance Output — The following table describes the instance command output fields for
VRRP.

Table 10: Show VRRP Instance Output

Page 262
Default
All VRIDs for the IP interface.
Values
1 — 255
Label
Interface name
VR ID
Own
Owner
Adm
Opr
State
Pol Id
Base Priority
InUse Priority
Msg Int
The name of the IP interface.
The virtual router ID for the IP interface
Yes — Specifies that the virtual router instance as owning the
virtual router IP addresses.
No — Indicates that the virtual router instance is operating as a
non-owner.
Up — Indicates that the administrative state of the VRRP
instance is up.
Down — Indicates that the administrative state of the VRRP
instance is down.
Up — Indicates that the operational state of the VRRP instance
is up.
Down — Indicates that the operational state of the VRRP
instance is down.
When owner, backup defines the IP addresses that are
advertised within VRRP advertisement messages.
When non-owner, backup actually creates an IP interface IP
address used for routing IP packets and communicating with the
system when the access commands are defined (ping-reply, tel-
net-reply, and ssh-reply).
The value that uniquely identifies a Priority Control Policy.
The base-priority value used to derive the in-use priority of the
virtual router instance as modified by any optional VRRP
priority control policy.
The current in-use priority associated with the VRRP virtual
router instance.
The administrative advertisement message timer used by the
master virtual router instance to send VRRP advertisement mes-
sages and to derive the master down timer as backup.
7750 SR OS Router Configuration Guide
Description