Alcatel-Lucent 7750 SR OS Configuration Manual page 306

Hide thumbs Also See for 7750 SR OS:
Table of Contents

Advertisement

List of Commands
Table 18: CLI Commands to Configure Filter Policies Parameters (Continued)
Command
dot1p
etype
dsap
ssap
snap-pid
snap-oui
Configure a redirect policy
config>filter
redirect-policy
description
destination
ping-test
drop-count
interval
timeout
priority
snmp-test
oid
return-value
url-test
url
Page 306
Configures an IEEE 802.1p value or range to be used as a MAC filter
match criterion.
Configures an Ethernet type II Ethertype value to be used as a MAC filter
match criterion.
Configures an Ethernet 802.2 LLC DSAP value or range for a MAC filter
match criterion.
Configures an Ethernet 802.2 LLC SSAP value or range for a MAC filter
match criterion.
Configures an IEEE 802.3 LLC SNAP Ethernet Frame PID value to be
used as a MAC filter match criterion.
Configures an IEEE 802.3 LLC SNAP Ethernet Frame OUI zero or non-
zero value to be used as a MAC filter match criterion.
Enables the context to redirect policies.
Creates a text description stored in the configuration file for a
configuration context.
Specifies a cache server destination (an IP address) to redirect packets
matching IP filter entry criteria.
The context to configure connectivity ping tests to validate the ability of
the destination to receive redirected traffic.
Specifies the number of consecutive ping test failures before declaring the
destination down.
The frequency at which the ping test, SNMP test, or URL test is executed.
Specifies the amount of time in seconds that is allowed for receiving a
response from the far-end host.
The destination's priority describes its relative importance within the
policy. If more than one destination is specified, the destination with the
highest priority value is selected.
The context to configure SNMP test parameters.
The OID of the object to be fetched from the destination.
Specifies the criterion to adjust the priority based on the test result.
The context to enable URL test parameters.
Specifies the URL to be probed by the URL test.
7750 SR OS Router Configuration Guide
Description
Page
383
385
383
387
386
385
359
357
390
390
390
391
391
391
392
392
392
393
394

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7750 sr series

Table of Contents