Alcatel-Lucent 7750 SR OS Configuration Manual page 46

List of Commands
Table 4: CLI Commands to Configure Basic IP Router Parameters (Continued)
Command
static-arp
tos-marking-state
unnumbered
Configure the system interface
config>router>interface
address
secondary
Configure IPv6 parameters on an interface
config>router>interface>ipv6
address
egress
ingress
filter
icmp6
packet-too-big
param-problem
redirects
time-exceeded
unreachables
neighbor
Configure router advertisement parameters
config>router>router-advertisement
interface
current-hop-limit
Page 46
Configures a static ARP entry associating an IP address with a MAC
address for the core router instance.
Specifies the TOS marking state.
Sets an IP interface as an unnumbered interface and the IP address to be
used for the interface.
Assigns an IP address, IP subnet and broadcast address format to an IP
interface. Only one IP address can be associated with an IP interface.
Assigns a secondary IP address, IP subnet/broadcast address format to the
interface.
Assigns an IPv6 address to the interface. Multiple addresses (up to 8) are
allowed per interface.
Specifies egress network filter policies for IPv6 on the interface.
Specifies ingress network filter policies for IPv6 on the interface.
Specifies the IPv6 filter policy to be associated with the interface. IPv6
filter policies must be configured in the config>filter>ipv6-filter context
before it can be specified in the router interface context.
Enables the context to configure ICMPv6 parameters for the interface.
Configures the rate for ICMPv6 packet-too-big messages.
Configures the rate for ICMPv6 param-problem messages.
Configures the rate for ICMPv6 redirect messages.
Configures the rate for ICMPv6 time-exceeded messages.
Configures the rate for ICMPv6 unreachable messages.
Configures an IPv6-to-MAC address mapping on the interface.
Configures router advertisement properties on a specific interface. The
interface must already exist in the config>router>interface context.
Configures the current-hop-limit in the router advertisement messages. It
informs the nodes on the subnet about the hop-limit when originating IPv6
packets.
7750 SR OS Router Configuration Guide
Description Page
104
104
105
51
96
103
53
112
107
107
107
112
112
113
113
114
114
115
66
116
116