List Of Commands; Table 7: Cli Commands To Configure A Vrrp Policy - Alcatel-Lucent 7750 SR OS Configuration Manual

List of Commands

Table 7
level at which each command is implemented with a short command description.
Table 8
VPRN service, indicating the configuration level at which each command is implemented with
a short command description. Refer to the IES chapter of the 7750 SR OS Services Guide for
information about IES command syntax and usage.
The VRRP command list is organized in the following task-oriented manner:

Table 7: CLI Commands to Configure a VRRP Policy

Command
Configure a VRRP policy
config>vrrp>policy
description
delta-in-use-limit
Configure VRRP policy priority events
config>vrrp>policy>priority-event
port-down
hold-set
priority
lag-port-down
7750 SR OS Router Configuration Guide
lists the commands to configure VRRP policy parameters, indicating the configuration
lists the commands to configure VRRP parameters on an interface and in an IES or
• Configure a VRRP policy
• Configure VRRP policy priority events
• Configure IES or VPRN VRRP owner parameters
• Configure IES or VPRN VRRP non-owner parameters
Text string describing the policy.
Sets a lower limit on the virtual router in-use priority that can be derived
from the delta priority control events.
Creates a port down priority control event that monitors the operational
state of a given port or SONET/SDH channel.
Configures the amount of time before the set state for a VRRP priority
control event can transition to the cleared state to dampen flapping
events.
Configures the effect the set event has on the virtual router instance in-
use priority.
Creates context for configuring Link Aggregation Group (LAG) priority
control event that monitors the operational state of the links in the LAG.
Description
VRRP
Page
243
242
248
245
246
250
Page 199