Alcatel-Lucent 7750 SR OS Configuration Manual page 384

Description
Default
Parameters
dst-mac
Syntax
Context
Description
Default
Parameters
Page 384
Configures an Ethernet 802.2 LLC DSAP value or range for a MAC filter match criterion.
This is a one-byte field that is part of the 802.2 LLC header of the IEEE 802.3 Ethernet Frame.
The snap-pid field, etype field, ssap and dsap fields are mutually exclusive and may not be part of the
same match criteria. "MAC Match Criteria Exclusivity Rules" on page 294
exclusive based on the frame format.
Use the no form of the command to remove the dsap value as the match criterion.
None
dsap-value — The 8-bit dsap match criteria value in hexadecimal.
Values 0x00 — 0xFF (hex)
mask — This is optional and may be used when specifying a range of dsap values to use as the match
criteria.
This 8 bit mask can be configured using the following formats:
Format Style
Decimal
Hexadecimal
Binary
Default FF (hex) (exact match)
Values
0x00 — 0xFF
dst-mac ieee-address [mask]
no dst-mac
config>filter>mac-filter>entry
Configures a destination MAC address or range to be used as a MAC filter match criterion.
The no form of the command removes the destination mac address as the match criterion.
none
ieee-address — The MAC address to be used as a match criterion.
Values HH:HH:HH:HH:HH:HH or HH-HH-HH-HH-HH-HH where H is a hexadecimal
digit
mask — A 48-bit mask to match a range of MAC address values.
Format Syntax
DDD
0xHH
0bBBBBBBBB
7750 SR OS Router Configuration Guide
describes fields that are
Example
240
0xF0
0b11110000