Alcatel-Lucent 7750 SR OS Configuration Manual page 397

Port Type Encap-Type
Ethernet Null
Ethernet Dot1q
Ethernet QinQ
SONET/SDH IPCP
SONET/SDH BCP-Null
TDM
SONET/SDH BCP-Dot1q
TDM
SONET/SDH Frame Relay
TDM
SONET/SDH ATM
ATM
Output Anti-spoofing Output — The following table describes the output for the command.
Sample Output
A:ALA-48# show filter anti-spoof
==================================================================
Anti Spoofing Table
==================================================================
SapId
------------------------------------------------------------------
==================================================================
A:ALA-48# show filter anti-spoof
7750 SR OS Router Configuration Guide
The values depends on the encapsulation type configured for the interface. The following table
describes the allowed values for the port and encapsulation types..
Allowed Values
0
0 — 4094
qtag1: 0 — 4094
qtag2: 0 — 4094
-
0
0 — 4094
16 — 991
vpi (NNI) 0 — 4095
vpi (UNI) 0 — 255
vci 1, 2, 5 — 65535
Label
SapID
IP Address
Mac Address
The SAP is identified by the port.
The SAP is identified by the 802.1Q tag on the port.
Note that a 0 qtag1 value also accepts untagged packets
on the dot1q port.
The SAP is identified by two 802.1Q tags on the port.
Note that a 0 qtag1 value also accepts untagged packets
on the dot1q port.
The SAP is identified by the channel. No BCP is
deployed and all traffic is IP.
The SAP is identified with a single service on the
channel. Tags are assumed to be part of the customer
packet and not a service delimiter.
The SAP is identified by the 802.1Q tag on the channel.
The SAP is identified by the data link connection
identifier (DLCI).
The SAP is identified by the PVC identifier (vpi/vci).
Displays the physical port identifier.
Displays the IP address.
Displays the MAC address.
IP Address
Filter Policies
Comments
Description
Mac Address
Page 397