Figure 17: Ies Vrrp Configuration Components - Alcatel-Lucent 7750 SR OS Configuration Manual

Figure 17
•
•
•
•
•
•
•
•
•
7750 SR OS Router Configuration Guide
displays the major components to configure a VRRP instance in an IES service.
SERVICE
IES
INTERFACE
ADDRESS
SECONDARY
VRRP vrid

Figure 17: IES VRRP Configuration Components

IES — The context to creates or modify an IES service.
Interface — A logical IP routing interface.
Address — Assigns the primary IP address for the interface. A primary IP address must be
assigned to each IP interface.
Secondary — Assigns a secondary IP address, IP subnet/broadcast address format to the
interface.
VRRP — The context to configure a VRRP virtual router instance. A virtual router is
defined by its VRID and a set of IP addresses.
Owner — When the
owner
backed up IP addresses. Only one router in the message domain can be the owner.
Non-owner — VRRP instances are created as non-owners unless the
specified. Non-owners are all the other virtual router instances participating in the
message domain that have the same VRID configured.
Backup — Non-owner virtual router instances create a routable IP interface address that is
operationally dependent on the virtual router instance mode (master or backup). The
backup command in
owner
address; it defines the already existing parental IP interface IP addresses that are
advertised by the virtual router instance.
For virtual router instances,
owner
advertised within VRRP Advertisement messages. This indicates to backup virtual routers
receiving the messages what IP addresses the master is representing.
Policy — (optional) Assigns an existing VRRP priority control policy association with the
virtual router instance.
OWNER
BACKUP
POLICY (optional)
NON-OWNER
BACKUP
POLICY (optional)
keyword is specified, the virtual router instance owns the
virtual router instances does not create a routable IP interface
defines the list of IP addresses that will be
backup
VRRP
keyword is
owner
Page 193