Owner Ies Or Vprn Vrrp - Alcatel-Lucent 7750 SR OS Configuration Manual

Configuring VRRP Policy Components

Owner IES or VPRN VRRP

Use the CLI syntax displayed below to configure IES or VPRN service owner VRRP
parameters:
CLI Syntax: config>service# ies service-id [{customer customer-id }]
The following output displays an example of an owner IES VRRP configuration:
Example: config>service>ies# interface tuesday create
The following example displays the owner VRRP configuration:
A:SR2>config>service>ies# info
----------------------------------------------
#------------------------------------------
A:SR2>config>service>ies#
Page 214
config>service# vprn service-id [customer customer-id ]
interface ip-int-name
address ip-addr/mask-length [broadcast {all-ones|host-
ones}]
no shutdown
vrrp vrid owner
authentication-type {password}
authentication-key [authentication-key | hash-key]
[hash|hash2]
backup ip-addr
init-delay seconds
mac ieee-mac-address
message-interval seconds
config>service>ies>if# address 10.10.36.2/24
config>service>ies>if# vrrp 2 owner
config>service>ies>if>vrrp# backup 10.10.36.2
config>service>ies>if>vrrp# authentication-type password
config>service>ies>if>vrrp# authentication-key testabc
interface "tuesday" create
address 10.10.36.2/24
vrrp 19 owner
backup 10.10.36.2
authentication-type password
authentication-key "testabc"
exit
exit
7750 SR OS Router Configuration Guide