Alcatel-Lucent 7750 SR OS Configuration Manual page 57

Learning the Tunnel Endpoint IPv4 System Address
This configuration displays the OSPF configuration to learn the IPv4 system address of the tunnel
endpoint.
CLI Syntax: config>router
Example
The following displays the configuration showing the OSPF output.
A:ALA-49>configure>router# info
----------------------------------------------
...
----------------------------------------------
A:ALA-49>configure>router#
7750 SR OS Router Configuration Guide
ospf
area area-id
interface ip-int-name
:
config>router# ospf
config>router>ospf# interface system
config>router>ospf>if# exit
config>router>ospf# interface ip-1.1.1.1
config>router>ospf>if# exit
ospf
area 0.0.0.0
interface "system"
exit
interface "ip-1.1.1.1"
exit
exit
exit
IP Router Configuration
Page 57