Alcatel-Lucent 7750 SR OS Configuration Manual page 305

Hide thumbs Also See for 7750 SR OS:
Table of Contents

Advertisement

Table 18: CLI Commands to Configure Filter Policies Parameters (Continued)
Command
icmp-type
src-ip
src-port
tcp-ack
tcp-syn
Configure a MAC filter policy
config>filter>mac-filter
mac-filter
scope
description
default-action
renum
Configure a MAC filter policy entry
config>filter>mac-filter
entry
description
action
Configure MAC filter entry matching criteria
config>filter>mac-filter entry
match
src-mac
dst-mac
7750 SR OS Router Configuration Guide
Configures matching on ICMP type field in the ICMP header of an IP
packet as an IP filter match criterion.
Configures a source IP address range to be used as an IP filter match
criterion.
Configures a source TCP or UDP port number or port range for an IP filter
match criterion.
Configures matching on the ACK bit being set or reset in the control bits
of the TCP header of an IP packet as an IP filter match criterion.
Configures matching on the SYN bit being set or reset in the control bits
of the TCP header of an IP packet as an IP filter match criterion.
Creates a MAC filter policy.
Configures the filter policy scope as exclusive or template. An exclusive
policy can only be applied to a single entity (SAP or network port). A
template policy can be applied to multiple SAPs or network ports.
A text string describing the filter policy.
The default action specifies the action to be applied to packets when the
packets do not match the specified criteria in any of the any filter entries of
the filter.
Renumbers existing filter entries to properly sequence filter entries.
Creates a filter entry and identifies a group of match criteria and the
corresponding action.
A text string describing the entry.
Creates the drop or forward action associated with the match criteria. If
not specified, the filter policy entry is not taken into account.
Creates context for entering/editing match criteria for the filter entry.
Configures a source MAC address or range to be used as a MAC filter
match criterion.
Configures a destination MAC address or range to be used as a MAC filter
match criterion.
Description
Filter Policies
Page
377
380
380
381
381
358
363
357
363
388
364
357
366
369
386
384
Page 305

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7750 sr series

Table of Contents