Basic VRRP Configurations
VRRP Router Interface Parameters
VRRP parameters are configured on a router interface with two contexts, owner or non-owner.
The status is specified when the VRRP configuration is created. When configured as owner,
the virtual router instance owns the backed up IP addresses. All other virtual router instances
participating in this message domain must have the same
configured as owner.
Up to 4 virtual routers IDs (
instance can manage up to 16 backup IP addresses, including up to 16 secondary IP addresses.
If there are multiple subnets configured on an Ethernet interface, you can configure VRRP on
each subnet.
VRRP parameters configured on a router interface must include the following:
The following example displays a sample configuration of a router interface owner and non-
owner VRRP configurations.
A:SR4>config>router# info
#------------------------------------------
echo "IP Configuration "
#------------------------------------------
#------------------------------------------
A:SR4>config>router#
Page 206
•
VRID
•
Backup IP address(es)
interface "system"
address 10.10.0.4/32
exit
interface "ethel"
address 10.10.14.1/24
secondary 10.10.16.1/24
secondary 10.10.17.1/24
secondary 10.10.18.1/24
exit
interface "fatfreddie"
address 10.10.10.23/24
vrrp 1 owner
backup 10.10.10.23
authentication-type password
authentication-key "testabc"
exit
exit
) can be configured on a router interface. Each virtual router
vrid
7750 SR OS Router Configuration Guide
configured and cannot be
vrid