Alcatel-Lucent 7750 SR OS Configuration Manual page 267

Table 11: Show VRRP Policy Output (Continued)
7750 SR OS Router Configuration Guide
Label
Delta Limit
Applied
Description
Current Priority
Event Type & ID
Event Oper State
Hold Set Remaining
Description
The delta-in-use-limit for a VRRP policy. Once the total sum of
all delta events has been calculated and subtracted from the
base-priority of the virtual router, the result is compared to the
delta-in-use-limit value. If the result is less than this value, the
delta-in-use-limit value is used as the virtual router in-use prior-
ity value. If an explicit priority control event overrides the delta
priority control events, the delta-in-use-limit has no effect.
If the delta-in-use-limit is 0, the sum of the delta priority control
events to reduce the virtual router's in-use-priority to 0 can pre-
vent it from becoming or staying master.
The number of virtual router instances to which the policy has
been applied. The policy cannot be deleted unless this value is 0.
A text string which describes the VRRP policy.
The configured delta-in-use-limit priority for a VRRP priority
control policy or the configured delta or explicit priority for a
priority control event.
A delta priority event is a conditional event defined in a priority
control policy that subtracts a given amount from the base prior-
ity to give the current in-use priority for the VRRP virtual router
instances to which the policy is applied.
An explicit priority event is a conditional event defined in a pri-
ority control policy that explicitly defines the in-use priority for
the VRRP virtual router instances to which the policy is applied.
Explicit events override all delta Events. When multiple explicit
events occur simultaneously, the event with the lowest priority
value defines the in-use priority.
The operational state of the event.
The amount of time that must pass before the set state for a
VRRP priority control event can transition to the cleared state to
dampen flapping events.
VRRP
Page 267