Alcatel-Lucent 7750 SR OS Configuration Manual page 367

port-id — Specifies the physical port ID in the slot/mda/port format.
bundle-id — Specifies the multilink bundle to be associated with this IP interface. The bundle key-
ima — Specifies Inverse Multiplexing over ATM. An IMA group is a collection of physical links
7750 SR OS Router Configuration Guide
If the card in the slot has Media Dependent Adapters (MDAs) installed, the port-id must be in the
slot_number/MDA_number/port_number format. For example 1/1/3 specifies the port 3 on
MDA 1 in slot 1.
The port-id must reference a valid port type. When the port-id parameter represents SONET/
SDH and TDM channels, the port ID must include the channel ID. A period "." separates the
physical port from the channel-id. The port must be configured as an access port.
If the SONET/SDH port is configured as clear-channel then only the port is specified.
word must be entered at the beginning of the parameter.
The command syntax must be configured as follows:
bundle-id: bundle-type-slot-id/mda-slot.bundle-num
bundle-id value range: 1 — 128
For example:
ALA-12>config#
ALA-12>config>port# multilink-bundle
bundled together and assigned to an ATM port.
frame [port-id | bundle-id]:dlci
cisco-hdlc slot/mda/port.channel
ima-grp bundle-id[:vpi/vci | vpi | vpi1.vpi2]
port-id slot/mda/port[.channel]
aps-id aps-group-id[.channel]
aps
group-id
bundle-type-slot/mda.bundle-num
bundle
type
bundle-num 1 — 128
ccag-id ccag-id.path-id[cc-type]:cc-id
ccag
id
path-id
cc-type
cc-id
lag-id lag-id
lag
id
qtag1 0 — 4094
qtag2 *, 0 — 4094
vpi NNI
UNI
vci 1, 2, 5 — 65535
dlci 16 — 1022
port bundle-ima-5/1.1
Filter Policies
keyword
1 — 16
keyword
ima, ppp
keyword
1 — 8
a, b
.sap-net, .net-sap]
0 — 4094
keyword
1 — 200
0 — 4095
0 — 255
Page 367