Table 11: Show Vrrp Policy Output - Alcatel-Lucent 7750 SR OS Configuration Manual

Show Commands
policy
Syntax policy [vrrp-policy-id [event event-type specific-qualifier]]
Context show>vrrp
Description This command displays VRRP priority control policy information.
If no command line options are specified, a summary of the VRRP priority control event policies dis-
plays.
Parameters
vrrp-policy-id — Displays information on the specified priority control policy ID.
event event-type specific-qualifier — Displays information on the specified VRRP priority control
Output VRRP Policy Output — The following table describes the VRRP policy command output fields.

Table 11: Show VRRP Policy Output

Page 266
Default All VRRP policies IDs
Values
1 — 9999
event within the policy ID.
Default
All event types and qualifiers
Values
port-down port-id
lag-port-down lag-id
host-unreachable host-ip-addr
route-unknown route-prefix/mask
Label
Policy Id
Current Priority & Effects
Current Explicit
Current Delta Sum
The VRRP priority control policy associated with the VRRP vir-
tual router instance.
A value of 0 indicates that no control policy policy is associated
with the virtual router instance.
When multiple explicitly defined events associated with the pri-
ority control policy happen simultaneously, the lowest value of
all the current explicit priorities will be used as the in-use prior-
ity for the virtual router.
The sum of the priorities of all the delta events when multiple
delta events associated with the priority control policy happen
simultaneously. This sum is subtracted from the base priority of
the virtual router to give the in-use priority.
7750 SR OS Router Configuration Guide
Description