Alcatel-Lucent 7750 SR OS Configuration Manual page 244

Configuration Commands
Parameters vrrp-policy-id — The VRRP priority control ID expressed as a decimal integer that uniquely
context service-id — Specifies the service ID to which this policy applies. A value of zero (0) means
priority-event
Syntax [no] priority-event
Context config>vrrp>policy vrrp-priority-id
Description This command creates the context to configure VRRP priority control events used to define criteria to
modify the VRRP in-use priority.
A priority control event specifies an object to monitor and the effect on the in-use priority level for an
associated virtual router instance.
Up to 32 priority control events can be configured within the priority-event node.
The no form of the command clears any configured priority events.
Page 244
identifies this policy from any other VRRP priority control policy defined on the system. Up to
1000 policies can be defined.
Values 1 — 9999
that this policy does not apply to a service but applies to the base router instance.
Values
1 — 2147483647
7750 SR OS Router Configuration Guide