Creating A Redirect Policy - Alcatel-Lucent 7750 SR OS Configuration Manual

Creating a Redirect Policy

Configuring and applying redirect policies is optional. Each redirect policy must have the
following:
•
•
•
Use the following CLI syntax to create a redirect policy:
CLI Syntax: config>filter# redirect-policy redirect-policy-name
7750 SR OS Router Configuration Guide
A destination IP address
A priority (default is 100)
At least one of the following tests must be enabled:
→ Ping test
→ SNMP test
→ URL test
description
destination ip-address
description description-string
ping-test
drop-count consecutive-failures [hold-down seconds]
interval seconds
timeout seconds
priority priority
[no] shutdown
snmp-test test-name
drop-count consecutive-failures [hold-down seconds]
interval seconds
oid oid-string community community-string
return-value return-value type return-type [disable|
lower-priority priority|raise-priority priority]
timeout seconds
url-test test-name
drop-count consecutive-failures [hold-down seconds]
interval seconds
return-code return-code-1 [return-code-2] [disable |
lower-priority priority | raise-priority priority]
timeout seconds
url url-string [http-version version-string]
[no] shutdown
description-string
Filter Policies
Page 329