Alcatel-Lucent 7750 SR OS Configuration Manual page 69

Use the following CLI syntax to configure the policy statement specified in the
policy policy-statement
CLI Syntax: config>router# policy-options
Example
The following output displays the prefix list and policy statement configurations:
A:ALA-49>config>router>policy-options# info
----------------------------------------------
...
7750 SR OS Router Configuration Guide
begin
commit
policy-statement name
default-action {accept|next-entry|next-policy|reject}
entry entry-id
action {accept|next-entry|next-policy|reject}
to
prefix-list name [name...(upto 5 max)]
from
prefix-list name [name...(upto 5 max)]
:
config>router>policy-options# begin
config>router>policy-options# policy-statement "ProxyARPpolicy"
config>..>policy-statement# default-action accept
config>..>policy-statement>default-action# exit
config>..>policy-statement# entry 10
config>..>policy-statement>entry# from
config>..>policy-statement>entry>from# prefix-list prefixlist1
config>..>policy-statement>entry>from# exit
config>..>policy-statement>entry# to
config>..>policy-statement>entry>to# prefix-list prefixlist1
config>..>policy-statement>entry>to# exit
config>..>policy-statement>entry# action reject
config>..>policy-statement>entry# exit
config>..>policy-statement# exit
config>router>policy-options#
prefix-list "prefixlist1"
prefix 10.20.30.0/24 through 32
exit
prefix-list "prefixlist2"
prefix 10.10.10.0/24 through 32
exit
policy-statement "ProxyARPpolicy"
entry 10
from
prefix-list "prefixlist1"
exit
to
prefix-list "prefixlist2"
exit
action reject
exit
default-action accept
command.
IP Router Configuration
proxy-arp-
Page 69