Alcatel-Lucent 7750 SR OS Configuration Manual page 408

Show Commands
Page 408
Label
Applied
Def. Action
Filter Match
Criteria
Entry
Log Id
Src. IP
Dest. IP
Protocol
ICMP Type
Fragment
Sampling
IP-Option
TCP-syn
Description (Continued)
The filter policy ID has not been applied.
No —
The filter policy ID is applied.
Yes —
The default action for the filter ID for packets that do not
Forward —
match the filter entries is to forward.
The default action for the filter ID for packets that do not
Drop —
match the filter entries is to drop.
Indicates the filter is an IP filter policy.
IP —
The filter ID filter entry ID. If the filter entry ID indicates the entry is
, then the filter entry is incomplete as no action has been
(Inactive)
specified.
The filter log ID.
The source IP address and mask match criterion.
no criterion specified for the filter entry.
The destination IP address and mask match criterion.
cates no criterion specified for the filter entry.
The protocol ID for the match criteria.
col specified.
The ICMP type match criterion.
specified.
Configures a match on all non-fragmented IP packets.
Off —
Configures a match on all fragmented IP packets.
On —
Specifies that traffic sampling is disabled.
Off —
Specifies that traffic matching the associated IP filter entry is
On —
sampled.
Specifies matching packets with a specific IP option or a range of IP
options in the IP header for IP filter match criteria.
Specifies that the SYN bit is disabled.
Off —
Specifies that the SYN bit is set.
On —
7750 SR OS Router Configuration Guide
0.0.0.0/0
0.0.0.0/0
indicates no proto-
Undefined
indicates no ICMP type
Undefined
indicates
indi-