Alcatel-Lucent 7750 SR OS Configuration Manual page 411

7750 SR OS Router Configuration Guide
Label
Entry
Log Id
Src. IP
Dest. IP
Protocol
ICMP Type
Fragment
Sampling
IP-Option
TCP-syn
Match action
Ing. Matches
Src. Port
Description (Continued)
The filter ID filter entry ID. If the filter entry ID indicates the entry is
, then the filter entry is incomplete as no action has been
(Inactive)
specified.
The filter log ID.
The source IP address and mask match criterion.
no criterion specified for the filter entry.
The destination IP address and mask match criterion.
cates no criterion specified for the filter entry.
The protocol ID for the match criteria.
col specified.
The ICMP type match criterion.
specified.
Configures a match on all non-fragmented IP packets.
Off —
Configures a match on all fragmented IP packets.
On —
Specifies that traffic sampling is disabled.
Off —
Specifies that traffic matching the associated IP filter entry is
On —
sampled.
Specifies matching packets with a specific IP option or a range of IP
options in the IP header for IP filter match criteria.
Specifies that the SYN bit is disabled.
Off —
Specifies that the SYN bit is set.
On —
The filter does not have an explicit forward or drop
Default —
match action specified. If the filter entry ID indicates the entry is
, then the filter entry is incomplete as no action has been
(Inactive)
specified.
Drop packets matching the filter entry.
Drop —
The explicit action to perform is forwarding of the
Forward —
packet. If the action is Forward, then if configured the nexthop infor-
mation should be displayed, including Nexthop: <IP address>, Indi-
rect: <IP address> or Interface: <IP interface name>.
Forward - indirect: ip-addr
Forward - interface: ip-int-name
Forward - next-hop: ip-addr
The number of ingress filter matches/hits for the filter entry.
The source TCP or UDP port number or port range.
Filter Policies
0.0.0.0/0
0.0.0.0/0
indicates no proto-
Undefined
indicates no ICMP type
Undefined
Page 411
indicates
indi-